Table of Contents
Why did my Samsung subwoofer stop working?
The sound on your wireless subwoofer can drop out if there is interference or a physical obstruction between the soundbar and subwoofer. You can try checking the firmware version, resetting, and reconnecting the subwoofer.
How do I reset my Samsung sound bar subwoofer?
Steps to Reset your Samsung Soundbar
- Turn on the soundbar by pressing the switch on button.
- Hold the power button either on the remote control or soundbar control panel.
- Continue to press down the power button until you see the ‘INIT OK’ message on the display panel.
- Wait for the soundbar restart and that’s all.
Why is my soundbar subwoofer not working?
Unplug the power cable and unplug the subwoofer. Make sure the subwoofer is plugged in first, then plug in the bar. Nothing else. Press the pairing button on the subwoofer and then follow the instructions to manually pair.
What happens when your subwoofer stops working?
If your subwoofer stopped working, there’s a good chance it was blown. To check, unplug the subwoofer and plug it back in. If it still doesn’t work, try switching the input from AUX to SUBWOOFER on the amp. If that doesn’t work, the subwoofer is probably blown and needs to be replaced.
Is there a reset button on a Samsung soundbar?
Reset the soundbar by powering it off and then pressing and holding the Play/Pause button until it displays ‘INIT OK’. Power on the soundbar, and then try pairing the soundbar to your TV again.
Why did my subs stop working all of a sudden?
Short Circuit. The most common cause of speaker failure is short-circuiting. A short circuit in the wires providing the signal will prevent the signal from ever reaching the subwoofer. A short circuit at the terminals on the subwoofer will also prevent electrical current and signal from reaching the subwoofer.
Why did my subs randomly stopped working?
How do you fix a subwoofer that stopped working?
You never want to connect or disconnect any cables while anything is on, lest something incurs accidental damage.
- Check connections and speaker wires.
- Check outlets, power cable, and fuse.
- Check system and menu settings.
- Verify connections, turn on the subwoofer, and set the volume.
How do you get a subwoofer to work?
Ensure the subwoofer has not been muted. Increase the volume level on the subwoofer. Ensure the speaker settings on the stereo system or TV have been configured properly to use the subwoofer. IMPORTANT: Certain speaker settings may disable the subwoofer.
How do I pair my Samsung soundbar with the subwoofer?
Connect the power cords for the soundbar and the subwoofer to the back of each, and then plug both into a wall outlet. Turn the Soundbar on, and the subwoofer should begin to connect automatically.
How do I reset my Samsung subwoofer without the remote?
On the back of the subwoofer, locate the ID set button and press it. The button may be too tiny for your fingers, so our team advises you to use a pointed object to press down the button. Note that you can find an ID SET button on some Samsung soundbars instead of the subs.
How do I know if my subwoofer is blown?
Test the sound at a low volume to listen for whether your sub has been blown. If it is distorted, you have a partially blown subwoofer, and if there is no sound at all, it is completely blown. If the subwoofer is receiving its signal via a cable, then check the cable before rushing to conclusions.
What causes subwoofer failure?
The main cause of sub-woofer failure is overdriving or driving a clipped or distorted signal continuously to your sub-woofer. This can result in a mechanical or electrical failure.
What causes subs to stop working?
Short Circuit The most common cause of speaker failure is short-circuiting. A short circuit in the wires providing the signal will prevent the signal from ever reaching the subwoofer. A short circuit at the terminals on the subwoofer will also prevent electrical current and signal from reaching the subwoofer.
How do I connect my subwoofer to my Samsung sound bar?
Connect the power cords for the soundbar and the subwoofer to the back of each, and then plug both into a wall outlet. Use a small pointed object to press the ID SET button on the back of the subwoofer. Continue holding until STANDBY turns off and LINK (Blue LED) blinks quickly.
Can a blown subwoofer be repaired?
Can you fix a blown subwoofer? Yes, you can fix a blown subwoofer especially when it is partially blown sub damaged cone. However, a damaged voice coil will be difficult to replace. Depending on the extent of the problem, the best solution is to purchase a new subwoofer.
Is it worth repairing a subwoofer?
A: The short answer to your question is no, the repair is likely not worth it. The price/performance ratio of subwoofers has improved considerably in the last decade, so finding a subwoofer that matches or beats the AS 20’s specifications—8″ driver, 60 watts RMS, 33 Hz to 140 Hz frequency response—is not too tough.
Why is my Samsung subwoofer not working?
– Press the Power button to turn on the soundbar. – Press and hold the Power button while pressing the Input button and the VOL- button (at the same time). – When RESET appears on the front panel display, release the buttons. – Unplug the power cord for 30 seconds.
How to troubleshoot a Samsung audiobar?
Called Samsung support and they said I have to call for a paid service call since I am out of warranty.
How to reset Samsung soundbar?
Turn on the soundbar by pressing the switch on button. You can use the remote control or dedicated button in your soundbar.
Why is my subwoofer not working?
Connect the power cords for the soundbar and the subwoofer to the back of each,and then plug both into a wall outlet.