Do Axis cameras come with a license?

Do Axis cameras come with a license?

Note that there are no AXIS Camera Station licenses included in AXIS S30 Recorder Series. ***The AXIS A1601 does not include a core device license as it has full and unified support within AXIS Camera Station Secure Entry.

How do I access my axis camera?

To access your site from a remote location open up AXIS Camera Companion 2.0 and log in with the same MyAxis account as used on the local site. Select the remote site, type in the site password and press Enter. You should now be connected to the site. your cameras and router up manually.

How do I add cameras to my axis companion?

Connect your desktop app to a door station

  1. In the AXIS Companion desktop app, go to. > Cameras.
  2. Click Add devices and add the door station. You can now answer the door station with your AXIS Companion desktop app.

What is Axis Camera default password?

root/pass
Axis: Traditionally root/pass, new Axis cameras require password creation during first login (note that root/pass may be used for ONVIF access, but logging into the camera requires root password creation) Basler: admin/admin.

What is the default IP for Axis Camera?

192.168.0.90
The default IP address for the Axis cameras and video encoders is 192.168. 0.90.

What is AXIS Camera Station?

AXIS Camera Station is a proven software platform for surveillance solution management, monitoring and maintenance of solutions based on Axis network cameras and IP devices.

Is Axis Camera Station free?

Axis Camera Station One is a FREE software solution for the simultaneous viewing and recording of high-quality H. 264, MPEG-4 and Motion JPEG video from a single surveillance camera.

Is Axis companion free?

The Axis Companion application is free, easy to use and makes CCTV simple. With no need for network or router configuration, it’s never been easier to get your CCTV system up and running – all from your mobile device, no PC needed.

How do I add a camera to Axis NVR?

Once the Preview page has loaded select the Setup tab and then go to Remote->Remote to add a camera. 7. Select Manual Add to manually add the camera via it’s Manufacturer profile (Axis or Onvif), IP address, RTSP Port, HTTP Port, User Name and Password. Then select save.

What is IP camera activation password?

In earlier versions of the firmware (to version 5.3. 0) IP cameras HIKVISION supplied to IP address 192.0. 0.64 and the default password is 12345. Starting with version 5.3.

How do I find my axis camera IP?

To navigate to the camera’s Device Details page, select Devices in the navigation bar to the left in your Room Alert Account, and then select your camera from the device list. You may find the unit’s IP address listed under Local IP.

How do I connect to my axis camera IP?

Configuring an Axis Camera

  1. Connect the camera. Connect the Axis camera to the computer using an Ethernet cable.
  2. Configure computer IP address. Set your computer’s IP address to 192.168.
  3. Launch the Setup Axis Camera Tool.
  4. Setup the Camera.
  5. Manual Camera Configuration.
  6. Setup Page.
  7. Configure Users.
  8. Configure Image Settings.

How do I activate my IP?

To enable DHCP or change other TCP/IP settings

  1. Select Start , then select Settings > Network & Internet .
  2. Do one of the following: For a Wi-Fi network, select Wi-Fi > Manage known networks.
  3. Under IP assignment, select Edit.
  4. Under Edit IP settings, select Automatic (DHCP) or Manual.
  5. When you’re done, select Save.

What is the default password for IP camera?

admin/admin
By default, when the IP camera powers on, it attempts to obtain an IP address from a DHCP server in your network. If the camera cannot obtain an IP address through DCHP within 90 seconds, it uses a default IP address of 192.168. 0.100. The default login credentials (Username/Password) are admin/admin.

How to discover your axis camera?

Make sure the Robot Radio bubble is selected

  • Enter your FRC team number in the Team ID box
  • Press Apply.
  • How to setup an axis camera for motion detection?

    Connect to the Axis IP camera by using the camera’s IP address in a web browser.

  • Login using the ‘root’ credentials.
  • When the live view tries to display,may ask for another login.
  • If prompted to ‘run’ the Apple QuickTime player make sure to allow.
  • Click on Setup > Detectors > Motion Detection.
  • How to set up axis camera station one recording software?

    – The recording folders will be created for each camera (named after serial number for each camera) – User name & password of QNAP NAS for each AXIS camera will be generated. (named after “ACC_serial number of camera”) – The recording quota will be well set up without manual configuration required.

    What is the default username and password for Axis cameras?

    In other words, the new Axis cameras don’t have a default password, you need to create one. However, you may try two Axis default passwords that were used on their previous product line. username: root and password: pass (most commonly used password) username: root and password: root. The default administrator user name root is permanent and cannot be deleted.