How do I delete a RAID in Synology?

How do I delete a RAID in Synology?

Make sure the RAID type of your storage pool supports changing RAID types

  1. Back up all your data.
  2. Go to Storage Manager > Storage (for DSM 7.0) or Storage Manager > Storage Pool (for DSM 6.2) and select the storage pool you want to remove.
  3. Click Remove.
  4. Create a new storage pool.
  5. Create one or more new volumes.

How do you break a RAID 1 mirror without losing data?

What you can do if you’re not sure and absolutely can’t risk losing the data at all is just take out one of the drives and boot the system. When it yells at you, just say that you want to remove the RAID. Then you can take that disk out and do the same with the other disk.

Can I change from RAID 1 to SHR?

Although RAID 1 cannot be changed to SHR or vice versa, an alternative method is to remove the storage pool you intend to change its RAID type, and then create a new storage pool and select a RAID type according to your needs.

Can you change RAID without losing data Synology?

Storage pools can be changed from one RAID type to another without losing existing data. For example, you can create a RAID 1 storage pool on your Synology NAS and later change it to RAID 5 if you install more drives.

How do you break a RAID 1 mirror?

Right click the mirror volume you want to remove, and select Break Mirror from the context menu. (In this step, you can also select Delete Mirror to remove both volumes that make up the mirror, but you lose the data on it.) To confirm your selection, click Yes.

How do I change RAID configuration in Synology?

Go left in ‘Storage Manager’ to ‘Volume’ and click on ‘Create’. Leave it at ‘Choose an existing storage pool’ and go to the next page. Choose how big the volume should be, go through the following steps, and click “Apply.” Your disks have now been converted to a RAID setup.

How do I change RAID type without losing data?

2 Answers

  1. Open Storage Manager.
  2. Go to Storage Pool.
  3. Select the storage pool you wish to change and click Change RAID Type from the Action drop-down menu.
  4. Select the RAID type to which you want to change the storage pool.
  5. Select which drive to add to the existing storage pool.

How do I change RAID 1 to RAID 6?

First migrate the group to RAID 1, then to RAID 5, and then finally to RAID 6.

  1. Go to Main Menu > Storage & Snapshots > Storage/Snapshot.
  2. Verify the following:
  3. Select a storage pool or single static volume.
  4. Click Manage.
  5. Select a RAID group.
  6. Select Manage > Migrate.
  7. Select one or more disks.
  8. Click Apply.

What is the difference between Synology SHR and RAID 1?

Unlike classic RAID, SHR divides each drive’s storage space into smaller chunks and creates additional redundant storage. Using the same example as before, SHR is able to divide the 4.5 TB of unavailable storage into smaller usable chunks and maximize the storage capacity of each drive.

How do I uninstall RAID 1?

How to delete RAID array with CTRL + i

  1. Turn on the computer.
  2. Use the up or down arrow keys to select “Delete RAID” Volume.
  3. Use the up or down arrow keys to select the RAID volume.
  4. Press Delete to delete the volume.
  5. Press Y to confirm the deletion.

How do I change RAID1 to RAID 6?

Can you create a RAID1 without losing data?

Re: Create a new RAID 1 with existing hard drive without losing data. It depends. If the dis currently is a RAID0 you can extend to RAID1, if it is a plain disk you need to backup and restore.

How to fix broken or crashed Synology raid set?

Remove all Drives from the broken or crashed Synology RAID set and connect them to a working Windows PC via SATA connectors. Alternatively, you may use SATA to USB converter cables or enclosures to connect Synology RAID drives to Windows PC or laptop

How to fix a degraded array in synology?

Power off the Rackstation and physically remove disk3. Boot up again and make sure your array2 is still accessible. It will be marked as degraded but it’s ok. Shutdown Synology, insert the removed disk3 back and boot up again. You should be able to format disk3 to basic now and copy all the data from degraded array2 to newly created basic array.

Is it possible to have 2 single volumes in Synology DSM?

Is that possible in Synology DSM? The 2nd disk (the one removed from the array) will be used for a new volume. In summary, array2 have now raid1 8TB in total, we want to have 2 single volumes, no raid, 16TB in total. I’ve done this already a while ago. Power off the Rackstation and physically remove disk3.

How to recover data from a broken or corrupted RAID 0 array?

If you are familiar with Windows, you can use Stellar® Data Recovery Technician to recover data from a broken, crashed, degraded, or corrupt RAID 0, RAID 5, and RAID 6 array. Problem solver and Data recovery specialist. Usually share informative articles on data recovery, database corruption and ways to recover lost data.