How do I fix E03 error?

How do I fix E03 error?

The machine is unable to drain the water away. Should the error code E3 appears it is warning that the machine is not draining. You can easily fix this problem by removing any blockages from the drain pump situated at the front of the machine for easy access.

How do you diagnose and fix a Hoover E03 error code?

How to Diagnose and Fix a Hoover E03 Error Code

  1. Remove the drain filter and rinse it to clean it.
  2. Check the drain pump and remove any blockages.
  3. Check that the drain hose is clear of obstructions.
  4. Check the wiring to the drain pump.
  5. Check there is no blockage in the drain pipe.

Why is my Hoover washer not draining?

If the washer won’t drain or is not draining properly, and the washer has a coin trap, remove the coin trap and clean it thoroughly. First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions.

What does error code E03 mean?

Should the error code E3 appears it is warning that the machine is not draining. You can easily fix this problem by removing any blockages from the drain pump situated at the front of the machine for easy access.

What does E13 mean on a Hoover washing machine?

When you see E13 displayed, or an LED continuously blinking thirteen times between pauses, this is your machine’s way of letting you know precisely what has gone wrong with it. In this case error code E13 relates to a fault with either the control board, dryer heater or temperature sensor.

Where’s the drain pump on washing machine?

The drain pump may be located behind removable panels in either the front or back of the washing machine, even underneath the appliance, requiring you to tip the machine forward to access it (consult your owner’s manual for instructions). You’ll see a drain hose and inlet hose connected to it with spring clamps.

What does E20 on a Hoover washing machine mean?

Check the drain pump is not blocked
On some models an obstruction or blockage in the drain pump may cause E20 to appear in the display.

What is code E16 on Hoover washing machine?

Heater Insulation Hoover Washing Machine Error Code E16 – If your washing machine is showing a E16 error on the digital display or the power light flashes sixteen times before pausing and repeating, it’s likely the machine is having a problem with the water heater. Advice: Check the heater element using a multimeter.

How do I completely empty my washing machine?

How to Manually Drain a Top-Loading Washing Machine

  1. Step 1: Turn off the power and lay down towels.
  2. Step 2: Locate the drain hose at the back of the washing machine.
  3. Step 3: Drain the water.
  4. Step 1: Turn off the power and lay down towels.
  5. Step 2: Locate the drain hose.
  6. Step 3: Drain the water.
  7. Step 4: Scrub the filter.

Why does my washing machine have water in the drum when not in use?

Handling a Clogged Washer Drain Hose The drain hose from your washer removes the used water after your clothes are clean. Unfortunately, sometimes other objects slip through and become lodged in the hose, preventing water from draining properly and leading to leftover water in the washer drum.