What fixes to use on feather edge boards?

What fixes to use on feather edge boards?

Gravel boards. Feather Edge Boards. Nails – 2.5″ (65mm) Annular ring nails for the structure. Nails – 1.5″ (40mm) Annular ring nails for the Feather Edge boards.

Can you screw feather edge cladding?

The choice is yours. The rails can be screwed into the posts through the sides and supporting brackets can be used to give extra strength. 3 inch number 8 screws are usually needed for this, all timber should be treated. The first feather edge board can then be fixed on the outside of your fence.

Where do you nail feather edge?

Feather-edge profiles are generally cut from green (wet) timber and will, as a result, shrink by up to 15mm as the board dries. We recommend that each board is fixed once with a nail located 10mm above the upper edge of the previous board.

What nails do you use for feather edge cladding?

Use 50mm galvanised nails to attach them – it is important you only use one nail per pale per rail (i.e. 3 nails) – do not nail two pales together. The single fixing is to allow the pales to expand and contract with the weather.

Where do you nail feather edge cladding?

What nails do I need for feather edge?

Use 50mm galvanised nails to attach them – it is important you only use one nail per pale per rail (i.e. 3 nails) – do not nail two pales together. The single fixing is to allow the pales to expand and contract with the weather. As the top of the fence is continuous, capping can be any length.

How far apart should feather edge posts be?

With featheredge fencing, there are 3 generic distances between posts, 1.8M, 2.7M and 3.0M.

What goes on top of feather edge fence?

The counter rail is fix along the top of the featheredge on the same side as the arris rails. The capping rail covers the end grain of the feather edge boards and the counter rail. The capping rail is nailed or screwed to the edge of the counter rail.

How do you fix feather edge cladding?

Fixing feather-edge cladding. Begin at the bottom, ensuring that the first board is level. Use a 10mm strip behind the lower edge of the bottom board for support. Overlap subsequent boards by 40 – 50mm. It is important not to reduce the recommended overlap.

Do feather edge cladding boards need to overlap?

Feather edge cladding is installed from the bottom up, thus the overlapped boards. For the first board consider putting a stripe behind for support and ensure it is completely level as this is a critical piece. The overlapping of the feather edge cladding is very important and must be kept consistent.

How do you fix a cladding board?

Cladding fixing positions How you fix your cladding depends on the style of board but there are standard guidelines you should adhere to: Use double battens to support abutting boards. Batten should extend the full width of the boards either side.

What is feather edge timber cladding used for?

Feather edge timber may also be used for applications beyond cladding, such as fencing. As is it cost effective and strong when fixed, feather edge cladding is a great fencing material for strength, cost and looks. Which Timber Species are Used for Feather Edge Cladding?