Table of Contents
What is Mortaseal?
MORTASEAL is a German Technology formulated as Waterproofing for Concrete substrate. Cement base formula prevents leak on concrete substrate for walls and floor. MORTASEAL is recommended for positive and negative side application. It provides a PERMANENT SOLUTION TO LEAKAGE.
How do you use cementitious WaterProofing?
Steps Involved in WaterProofing
- Step 1: Surface Preparation. Clean the surface thoroughly free from loose materials, dust, and oil.
- Step 2: Application of Primary Coat. Ad.
- Step 3: Unrolling the Membrane Sheets.
- Step 4: Heating the Membranes.
- Step 5: Pressing the Membrane.
How do you use Mortaseal?
Uses: For permanent damp/wet area such as Bathroom, Cistern tank, Swimming pools, Roof decks, Retaining walls and Firewalls, Dams, Floor slab, Kitchen Tops, Fish pond, Concrete gutters, Plant boxes, Basements, and etc.
How do you mix Mortaseal?
Type M Mortar, shall be mixed in proportion of one bag Portland Cement, one-quarter bag MORTASEAL® Mason’s Lime, to not more than 3 3/4 cu. ft. sand (1: 1/4 : 3 3/4).
How long does cementitious waterproofing last?
It can be very expensive. And if you don’t have the right product, you may need to do it all again in 10 years. A cheap product might last 10 to 15 years. A quality PVC membrane might be a third more expensive but last up to 60 years, so there are incredible benefits long-term.”
What are the 4 steps to waterproofing?
4 Steps for Waterproofing Pools
- Smooth the Substrate.
- Clean the Substrate.
- Apply the Waterproofing Membrane.
- Test for Leaks.
How do you apply Thoroseal waterproofing?
Start at the top and work down. Use a tampico fiber brush to apply Super Thoroseal® in a thick coat, working the mixture into the pores of the surface for a good penetrating seal. Double back and use the brush to smooth out the material. Allow 12 hours between coats for drying time.
Which type of waterproofing is most expensive waterproofing?
PVC membrane is one of the most frequently used waterproofing products for roofs. It is both water and vapor permeable and can be reinforced to offer extra durability. It is also very easy to install and has a long lifespan. However, these benefits come at a premium cost – around $55 per foot of membrane.
Which waterproofing is best for roof?
Bitumen-based waterproofing materials are among the most preferred and widely used waterproofing materials in the construction industry. This material is highly preferred for roof insulation with its ease of use, price/performance advantage.
What should you do before waterproofing?
5 steps to take before waterproofing
- clean the substrate;
- examine the surfaces to be waterproofed;
- prepare the surfaces;
- check and renovate the joints and the wells;
- proceed to the waterproofing of joints and drains.
How do you calculate waterproofing?
Concrete sealers applied to the interior of your basement will cost about $3-$9 per square foot. Normal waterproofing paint costs about $40 per gallon and covers about 75 square feet. A professional grade waterproofing paint can cost up to $130 per gallon.
How many coats of Thoroseal are there?
Just clean the surface of dust and other particles before application. Next, add 1.5 liters of water for every can and shake the can well. Then apply two coats on the surface. The first coat should be applied horizontally.
What is Thoroseal used for?
Thoroseal® 550i is a ready-to-use polymer-modified cement-based coating. It is used to waterproof and protect concrete, mortar, and masonry surfaces requiring either positive- or negative-side waterproofing. Thoroseal® 550i can be applied by low-pressure spraying or hand troweling.
Which waterproofing is best?
Polyurethane Polyurethane is considered one of the best waterproofing materials. It can be applied seamlessly and penetrates the surface deeply and evenly. Thus, the polyurethane membrane will fill in even the finest cracks in concrete, reducing its water absorbency capacity.
What is the best way to waterproof a concrete roof?
Resincoat Roof Sealer & Waterproof Coating is the best way to seal and waterproof a damaged concrete roof. The formula will adhere to the splits and cracks in the roof leaving a waterproof finish that protects against leaks.
How long should waterproofing last?
While basic waterproofing membranes should last at least ten years, they can last much longer given the right choice and circumstances. Conversely, poor quality waterproofing will rarely last the distance.
Can I waterproof over existing waterproofing?
ANSWER. ANSWER – If the ceramic tile is already installed there is no way to fully waterproof the floor after the fact, unless you replace the tile and install a legitimate waterproof membrane during the replacement process. Some people will try to put a sealer on the grout joints, but that doesn’t waterproof it.
How much does foundation waterproofing cost?
On average, it costs between $3 and $10 per square foot to waterproof a basement. Smaller projects can run as low as $600, while larger waterproofing jobs can cost upwards of $20,000. The cost depends on whether or not you’re doing a smaller indoor project or something like a major exterior waterproofing update.
Is Thoroseal waterproof?
Super Thoroseal® Waterproof Coating is a powder, cement-based waterproofing product for protecting concrete and masonry substrates. Easy to use, just add water. Coating can be applied to interiors and exteriors, above or below ground. Weatherproofs, seals out dampness with long lasting, decorative white finish.